RXP-2025SO – Triple-Beam X-Ray Inspection Systems
RXP-2025SO Triple-Beam X-Ray Inspection Systems deliver the highest level of inspection performance for canned, bottled, jarred, and tub-packaged products. Combining top-down and dual-aspect inspection technologies, the system utilizes three independent generator and detector sets to provide complete product coverage and redundant inspection from multiple perspectives. Designed specifically for packaged food and beverage applications, the RXP-2025SO detects metallic and non-metallic contaminants as small as 0.3 mm while eliminating blind zones and improving detection accuracy regardless of contaminant position or orientation.
Overview
The RXP-2025SO Triple-Beam X-Ray Inspection System combines the advanced bottom-inspection capabilities of the RXP-2025IO Single-Beam system with the multi-aspect inspection technology of the RXP-2025DH Dual-Beam system to provide complete and redundant inspection coverage for canned, jarred, bottled, and tub-packaged products. Utilizing three independent generator and detector sets, the system captures multiple inspection perspectives of every product to achieve exceptional contaminant detection performance.
Products first pass through a top-down inspection zone, ensuring complete inspection of container bottoms, including areas behind raised or domed base features. The product then enters a dual-beam inspection zone, where two additional inspection paths positioned at a 90° offset provide multi-aspect inspection of the main product body. This segmented inspection approach helps eliminate blind areas and improve detection performance regardless of contaminant location or orientation within the package.
Features
- Designed specifically for canned, bottled, jarred, and tub-packaged products.
- Triple-beam inspection technology utilizes three independent generator and detector sets for maximum inspection coverage.
- Combines top-down and dual-beam inspection to provide complete and redundant product inspection.
- Three-image analysis captures multiple inspection perspectives of every product.
- Top-down inspection zone provides complete inspection of container bottoms, including areas behind raised or domed base features.
- Dual-beam inspection zone utilizes two inspection paths positioned at a 90° offset for multi-aspect contaminant detection.
- No blind areas through intelligent partitioning and multi-aspect inspection.
- Multiple advanced inspection algorithms deliver exceptional contaminant detection performance.
- Defect inspection capability detects breakage, displacement, and cracks.
- Integrated side transfers and infeed/outfeed conveyor sections designed specifically for beverage and canned/jarred food applications.
- Ultra-fast reject system suitable for high-speed production lines.
- Large capacity – high speed polymer chain belt and twin 750W SEW motors
- Anti-jamming design incorporates software and hardware safeguards to minimize production interruptions.
- Sealed tunnel construction keeps products secure throughout the inspection process.
- Operator-safe design featuring a Category 3 safety circuit for immediate shutdown if unsafe conditions are detected.
- Customizable programming allows inspection settings and detection algorithms to be optimized for specific applications.
- 304 stainless steel construction designed for demanding food and beverage production environments.
Applications
- Canned food products
- Bottled food and beverage products
- Jarred products and glass containers
- Tub-packaged products
- Products with domed, raised, or difficult-to-inspect container bases
Contaminants Detected
- Ferrous, non-ferrous, and stainless steel contaminants
- Glass fragments
- Ceramic contaminants
- Stone contaminants
- Bone fragments
- Hard rubber and hard plastic contaminants
- Metal fragments and wire contaminants, including stainless steel contamination down to 0.3 mm and wire contamination down to 0.2 × 2 mm under test conditions
TRIPLE BEAM X-RAY INSPECTION SYSTEM
| RXP-2025SO | |
|---|---|
| X-Ray Tubes: | 100Kv, 480W, (2) / 80Kv, 210W (1) |
| Inspection Width: | 160mm (6.20 in) |
| Inspection Height: | 260mm (10.23 in) |
| Detection Sensitivity without product: | SUS Ball Φ 0.3mm SUS Wire Φ 0.2 * 2mm Ceramic Φ 1.5mm Glass Φ 1.5mm |
| Conveyor Speed: | 5 – 60 meters / minute |
| Display Screen: | Full-color TFT 17″ Touch Screen |
| Operating System: | Windows 7 Professional |
| Connectivity: | USB and Ethernet |
| Product Management: | Complete production log |
| Image Management: | Save/Print/Analyze |
| Power: | 220V, Single Phase, 25 amp |
| Air Pressure: | 0.6-0.8 Mpa |
| Construction: | SUS 304 matte finish |
| Rejecter: | High speed push exclusion |
| Temperature Control: | Integrated Industrial Air Conditioner |
| Safety: | Cat 3 Safety Circuit |
| Certifications: | FDA CFR 21.1020.4 compliant |
Note: Product models and specifications are subject to change. For more information, contact Magnattack
Powered by TDI
Talk to an Expert
Got a question or need a quote? Our contamination control specialists are here to provide fast, personalized guidance and help you find the right solution, from magnetic separation and metal detection to X-ray inspection, checkweighing, and optical sorting.
Contact us today and experience the reliability and responsiveness that sets us apart in supporting your success.
United States
(630) 994-3310
Australia & International
+61 2 4272 5527
New Zealand
099 424 897
South America
+54 9 2352 44-9007